Products > Miscellaneous > Shock Cord & Fittings
3F70 & 3F71 Shock Cord (bungee) is available in 3/16”, 1/4”, 5/16” and 3/8” diameter, other sizes by request. (3F71 is a softer, more elastic bungee).

To fit the hook and assembly wire is not an easy process. First roll back the outer braid to expose the rubber core, cut approximately 2cm off the rubber, then roll the braid back. Next slide the hook on and pull the braid and rubber through, you will need to stretch the rubber to do this. Once the rubber is through the hook, slide over the assembly wire and compress.
Bungee SizeHookAssembly Wire
5mmSP168-ASP169-A
6.5mmSP168-BSP169-B
8mmSP168-CSP169-C
9.5mmSP168-DSP169-D
12.5mmSP168-FSP169-F
SizePart Number
5mm or 3/16”3F70-5MM
6.5mm or 1/4”3F70-6.5MM
8mm or 5/16”3F70-8MM
9.5mm or 3/8”3F70-9.5MM
12.5mm or 1/2”3F70-12.5MM
5mm or 3/16”3F71-5MM
6.5mm or 1/4”3F71-6.5MM
8mm or 5/16”3F71-8MM
9.5mm or 3/8”3F71-9.5MM