Products > Hardware - Rivets > Cherry Self-Plugging MS Rivets
These cherry rivets are a hollow rivet where the inner stem of the mandrel is drawn into the hollow part. You will require Cherry G25B hand tool and H-901-5-4C pulling head. This series replace CR162 and CR163.

To order take the part number, followed by the diameter code and then the grip code. For Example: CR9163-5-4 is a universal head rivet with a 5/32” diameter and a riveting range of 0.188” to 0.250”
StylePart No
Universal HeadCR9163
CountersunkCR9162
SizeDiameter Code
1/8”-4
5/32”-5
3/16”-6
Grip LimitsGrip Code
MinMax
-0.062”-1
0.063”0.125”-2
0.126”0.187”-3
0.188”0.250”-4
0.251”0.312”-5
0.313”0.375”-6
0.376”0.437”-7
0.438”0.500”-8
0.501”0.562”-9
0.563”0.625”-10
0.626”0.687”-11
0.688”0.750”-12