Products > Hardware - Clips > Rubber Grommets
Available as SP40 (Natural rubber), SP93 (Nitrile rubber) or SP95 (Neoprene rubber).

Grommets are ordered by the part number followed by a letter to denote thickness of material the grommet is required to fit into. This is followed by a number denoting the ID in thirty-seconds of an inch.

For example SP93/B16 is a grommet that will suit a material 0.07” thick, has an i.d. of 1/2” and will fit a hole of 11/16”.
Size LetterMaterial Thickness
A0.04”20 swg
B0.07”16 swg
C0.1”14 swg
D0.15”10 swg
E0.2”-
F0.25”-
Size NoGrommet IDFits Hole
41/8”1/4”
63/16”5/16”
81/4”3/8”
105/16”7/16”
123/8”1/2”
147/16”5/8”
161/2”11/16”
189/16”3/4”
205/8”13/16”
2211/16”15/16”
243/4”1”
Result Page: 1 2 3 Next