Products > Hardware - Pins > Taper Pins
Pins are ordered by the part number followed by a letter to denote the diameter at the small end and then a number to denote the length in eighths of an inch.

For example:
SP29/H12 is a stainless steel pin with a small end diameter of 1/8” and a length of 1-1/2”.

SP31/N8 is a high tensile steel cadmium plated, split taper pin with a small end diameter of 1/4” and a length of 1”.

Please note that in the SP31 and SP32 range it is difficult to see the split!
DescriptionPart Number
High tensile steel, cadmium platedSP28
Stainless SteelSP29
High tensile steel, cadmium plated, splitSP31
Stainless steel, splitSP32
Light alloy, dyed blueSP65
Size CodeDiameter
E1/16”
G3/32”
H1/8”
K5/32”
L3/16”
N1/4”
P5/16”
R3/8”
Result Page: 1 2 3 4 Next