One litre tin of adhesive used for rubber, many plastics and metal. Surfaces must be dry and clean, apply adhesive to both surfaces and press parts into position after 2-8 mins. Use solvent No 1 for cleaning...

ACF-50 is an ultra-thin fluid compound that actively treats metal using advanced polar-bonding technology. Synthetic inhibitors and active chemistry penetrates through the oxide deposits to the base of...

Used when bonding acrylic to acrylic, as in compass mount blocks, reinforcing strips, patches etc. The thickened cement is heavy bodied and is easily applied from the tube.

Aerodux 500 resin with hardener 501 meets the requirements of BS1204 parts 1 and 2, and BS1203 (type WBP). This adhesive is highly suitable for bonding a wide range of materials. Sold in 1 kg containers.

Popular two part adhesive available in handy 375 gram kit. Supplied compete with technical data sheet that gives instructions on clamping times, preparations and spread rates.

A general purpose lubricating oil of low freezing point, particularly suitable for all aircraft parts requiring a light oil.

A liquefied propellant which provides a powerful blast for the easy removal of dust and other loose contamination from precision equipment such as cameras and printed circuits where the use of a liquid...

A fast, effective, foaming cleaner for all lighting equipment, plastic, vinyl cloth etc. Solves a wide variety of cleaning problems. Special deep action combination of solvents and detergents foam away...

A powerful, fast evaporating solvent cleaner/degreaser. Suitable for use in the aviation industry, its powerful flushing action rapidly removes contaminants. It evaporates to leave a clean dry surface,...

Ambersil 40+ provides effective and convenient solutions to a wide range of maintenance problems in one aerosol! Ambersil 40+ protects metal against corrosion, dissolves light rust, prevents ‘finger...

Ambersil AMS4 is a non-melting, heat-resistant grease with excellent dielectric properties. After evaporation of the carrier solvent it will adhere readily to dry electrical insulation materials and confer...

The Ardrox crack detection kit is a quick and easy way to make inspections of airframe, landing gear and components using highly sensitive dye penetrants which will show defects as bright red lines. A...

A specialist solvent cleaner/degreaser designed to remove a variety of uncured sealant and adhesive residues, principally in the aerospace industry. It will remove many stubborn residues such as uncured...

Used by traditionalists for waxing hand sewing threads.

Boelube is a specially formulated lubricant patented by Boeing. Use it on drill bits, saw blades, or wherever smooth cutting action is required.

Brillianize makes shiny surfaces brilliant. The cleaned surface resists finger marking, has anti-static properties, repels dust. It is a non-flammable and non-toxic liquid. Use it to clean Plexiglass,...

This is a clear protective lanolin which can be used to protect control cables, plus it is suitable as a temporary protection against corrosion on bare metals. Available in 1 litre containers.

We keep in stock Total Oil grades D80 and D100 (equivalent to Aeroshell W80 and Aeroshell W100) in 1 litre containers.

DGF 123 is a Dry Graphite Film lubricant, originally engineered for pre-assembly lubrication of machinery parts. It is specifically blended to give a uniform spray to any clean, dry surface and evaporate...

Multi-purpose, one component silicone sealant that cures to a tough rubber at room temperature, available in clear, white and black. Good adhesion to many substrates and remains flexible from –60°C...

A non-melting, waterproofing and insulating silicone compound for ignition systems and electronic equipment. To specification MIL-59860-C.

Now available to the aerospace industry is this new product designed exclusively for use on aircraft windshields and passenger windows. Engineered with the advance fabric technology of Sontara® and...

A fine lubricating and preservative oil used to prevent corrosion in internal combustion engines during extended storage. Sold in US quarts.

A rapid cooling agent for instant fault finding on electronic equipment. It reduces component temperature to –50°C plus it is non-flammable, has low toxicity and is odourless in use. It is an...

PR1005L is a ready to use synthetic rubber solution, packed in ½ litre tins. The compound is red in colour and cures at room temperature by the evaporation of the solvent, we recommend at least...

A lubricant for fuel and oil line valves, especially suitable for aromatic and high octane fuels. Also suitable as gasket paste and as an anti-seize lubricant for threads. Supplied in a 1 lb. tin but...

Aerokleen CD1 has been specifically developed to meet customer requirements for a high performance, cost effective, water dilutable aircraft surface cleaner. Aerokleen CD1 is formulated from a new class...

High temperature (up to 260°C), red in colour, one component silicone sealant that is suitable for use on firewalls, meets spec MIL-A-46106 Group 3 Type 1. RTV106 is supplied in tubes of 82 mls in...

Small can of primer to be applied before installing self adhesive repair patches (no shelf life).

For easy cleaning, polishing and reconditioning of most types of moulded or thermoformed plastics. Please note, unsuitable for cellulose acetate. Greygate plastic polish should be applied with a soft...

This compound sets quickly and remains pliable. Resists aliphatic and aromatic solvents, lubricants, water, steam and fuels. This sealant has been tested to temperatures of 600°F (316°C). Supplied...

Castrol low temperature mineral based hydraulic fluid (meets Def. Stan. 91-48/1) is completely compatible with other hydraulic fluids.

We keep in stock both the R328 and standard RDF ground de-icing fluid. RDF is applied as a spray to remove frost deposits from the airframe. R328 sold in 5 litre cans. RDF is sold in 25 litre containers....

A unique speciality product that provides the instant answer to the problem of removing old labels and unsightly label residues from a wide variety of surfaces. Now there is no need to scratch and scrape.

A water based formulation for quick and easy site detection of gas and air leaks. It contains no oils, silicones or harmful solvents; no “run off” hazard. It is non flammable and completely...

LPS1 Greaseless lubricant is specially formulated to give a dry thin lubricating film that penetrates deep into minute crevices while resisting oil, dust and dirt build up. It displaces moisture and is...

LPS2 provides a fast acting oily coating that can be used on indoor and outdoor equipment. It’s fast penetrating action gets in to “hard-to-reach” areas and will help loosen frozen...

Applies a soft waxy film to help stop rust and corrosion giving up to 2 years protection. Supplied in 11 oz. aerosol cans and 5 litre cans. Safe to use on fabric, plastic, rubber, paint and other finishes....

PreSolve cleans on contact with controlled evaporation for deep cleaning penetration. It’s non-conductive, contains no CFCs or chlorinated solvents. Cleans and removes adhesives, gummy residues,...

Strong Steel Stick is a convenient, hand-kneadable, two-ounce stick for fast emergency repairs to parts. Strong Steel Stick contains steel and makes any repair look new. It stops leaks and works well...

LPS Tapmatic Dual Action #1 Gold Cutting Fluid simultaneously protects and lubricates to reduce friction and eliminate chip welding in tapping, drilling, reaming and threading. #1 Gold contains EP additives...

This additive contains an anti-scuffing agent and can dramatically reduce engine wear, it is applicable to all Lycoming piston engines and factory recommends use at every oil change or 50 hours.

Micromesh scratch remover for Perspex and Plexiglass is a series of eight cloth backed, colour coded, cushioned abrasives. The floating suspension built into Micromesh makes it invaluable for fine finishing...

Penetrating oil in handy 8 fluid oz. plastic bottles, many uses in aviation including frozen or rusted nuts and bolts and carburettor linkages.

This synthetic oil was developed for all year round use and is suitable for both severe and very severe conditions. Change over to Multigrade is best achieved by an oil change. Available in 1 litre containers....

Originally developed for use in aviation, Plexus is quite simply the most effective product available for cleaning, protecting and polishing clear and coloured plastics: Plexiglass, Fibreglass, ABS, Mylar...

This is a two part polysulphide rubber compound employing an advanced chemical curing system. PR1422 type A is a brushing sealant suitable for sealing aircraft fuel tanks PR1422 type B is a filleting...

A white, non-runny consistency, ready to use adhesive sealant that cures at room temperature to a resilient silicone rubber that has the following technical advantages:- 1) Excellent bonding 2) Flexible...

You would normally use this type of oil in new or freshly overhauled engines for at least the first fifty hours before changing over to detergent (D) oils. Also used in vintage engines. We keep in stock...

Aircraft cement specially formulated for adhesion of Ceconite fabric to wood or metal air frames and for lap joints. Supplied in US quart or US gallon cans. Please ensure you read the Ceconite manual...

Clear liquid used for cementing perspex together, simply apply the cement to the areas to be joined. Tensol cement will actually weld the two pieces together without any discolouration. Always refrigerate...

Inspectors anti-sabotage lacquer for security locking of nuts, bolts etc. Order by part number F900 followed by the colour required.

Synthetic based oil for use by all two stroke aircraft engines under the most severe conditions throughout the year. Sold in one litre containers (mix with petrol to the ratio as advised by the manufacturer).

Wadpol is a highly effective impregnated wadding that cleans and polishes weathered or corroded aluminium and painted surfaces, giving a smooth finish and lasting protection thanks to its built-in corrosion...

Simply apply paste to dipstick in a thin even layer. Immerse in fluid for 10 seconds and examine immediately for any change in colour.

A yellow paste that is used for metal to metal joints and wood to metal joints, bolts are often coated with this material before assembly. Two types available:- Duralac to specification DTD369B supplied...