Register
Login
Basket
Contact
Products >
American Hardware
Flared tube and pipe thread. Tube OD UNF Thread NPT Thread Part Number Price 1/8” 5/16”...
Read More
Sleeve for metal tube. Use with AN818 nut. Tube OD Part Number Price 1/8” AN819-2D 3/16”...
Read More
Flared tube and pipe thread, 90 degree. Tube OD UNF Thread NPT Thread Part Number Price 1/8” 5/16”...
Read More
Coupling nut for metal tube. Use with AN819 sleeves. Tube OD UNF Thread Part Number Price 1/8”...
Read More
Push on hose to pipe thread. Hose ID NPT Thread Part Number Price 1/4” 1/8” AN840-4D 3/8”...
Read More
Tube OD UNF Thread Part Number Price 3/16” 3/8” MS21913-D3 1/4” 7/16” MS21913-D4...
Read More
It’s very easy to get confused when ordering AN pipe fittings, so here is a guide to try and help...
Read More
Hose to universal. Tube OD UNF Thread Part Number Price 1/4” 7/16” AN807-4D 3/8” 9/16”...
Read More
For flared tube bulkhead fittings. Tube OD UNF Thread Part Number Price 1/8” 5/16” AN924-2D...
Read More
View All Products In This Section >
These hexagon head, unified thread aircraft bolts are made of high-strength 4037 or 8740 type alloy...
Read More
100 degree countersunk, flat head cross recessed. Replaces AN507 range. Threaded the entire shank, 55,000...
Read More
100 degree countersunk, flat head cross recessed. Replaces AN509 series. Plain shank with thread at...
Read More
12 point flanged head 180,000 psi minimum tensile strength bolts. Add “H” before dash number...
Read More
Truss head, non-structural machine screws. Minimum tensile strength 55,000 psi. Most of our stock have...
Read More
These cross recessed, pan head, steel screws feature a 60,000 psi minimum tensile strength and are cadmium...
Read More
British A102 and American AN bolts can often be interchanged. This chart gives a cross reference between...
Read More
These cross recessed, pan head, steel screws feature a 55,000 psi minimum tensile strength and are cadmium...
Read More
Clevis bolts have slotted brazier type heads. They are special purpose bolts for where a large shearing...
Read More
View All Products In This Section >
These loop type cushioned aluminium alloy clamps are suitable for tubing or conduit. The cushion (non...
Read More
All “O” rings should be lubricated before installation and constant lubricant should be...
Read More
AN900 / MS35769 annular ring copper-asbestos gaskets are suitable for temperatures up to 500°F...
Read More
Flexible grommets, made from black synthetic rubber to specification MIL-G-3036. Resistant to hot oil...
Read More
Light duty stainless steel hose clips. Hose OD Part Number Price From To 11mm 16mm NAS1922-0050-1 14mm...
Read More
Aero-Seal stainless steel clamps are for industrial and aircraft applications. This tangential worm-screw...
Read More
Order a hose clip by using the part number MS35842 followed by the size number for example MS35842-14....
Read More
The best clamp for small diameter hose and tubing. Stainless steel band and housing with plated carbon...
Read More
Tangential worm-screw type for use on fuel, oil, air, and coolant lines. Worm drive provides uniform...
Read More
View All Products In This Section >
Replaces AN365 and MS20365. Thread Cadmium Plated Stainless Part Number Price Part Number Price #4-40...
Read More
Cadmium plated finish with dry film lubricant applied. Alternative to AS8602, K1000. Thread Part Number...
Read More
AN310 castle nuts are used with drilled-shank bolts, clevis bolts, eye bolts and studs. The slots in...
Read More
Cadmium plated finish with dry film lubricant applied. Alternative to AS8609, F5000. Thread Part Number...
Read More
MS21083 Nyloc Half Stiffnut Alternative to AN364 and MS20364. Thread Cadmium Plated Stainless Steel...
Read More
Replaces AN363. Thread Part Number Price #4-40 MS21045-04 #6-32 MS21045-06 #8-32 MS21045-08 #10-32 MS21045-3...
Read More
Cadmium plated finish with dry film lubricant applied. Alternative to AS8600 and H14-L. Thread Part...
Read More
Cadmium plated finish with dry film lubricant applied. Alternative to AS8603, MK1000, NAS697. Thread...
Read More
Cadmium plated finish with dry film lubricant applied. Alternative to MF5000. Thread Part Number Price...
Read More
View All Products In This Section >
Available in stainless steel and plated steel as listed below. Diameter Length Corrosion Resistant Cadmium...
Read More
1/8” Diameter Length Part Number Price 7/32” MS20392-1C7 9/32” MS20392-1C9 11/32”...
Read More
Positive locking pins that can readily be used without the aid of tools. Made of spring steel, cadmium...
Read More
2” long, made in 14swg steel. AN415-2
View All Products In This Section >
Order by the part number MS20470 (universal head) or MS20426 (countersunk head) followed by A or AD...
Read More
Bulbed CherryMax is a high stem, retention lock spindle, blind rivet with a clearly inspectable, mechanical...
Read More
Designed for installing anchor nuts. To order take the part number, followed by the diameter code and...
Read More
These countersunk rivets have a head which is one size smaller than normal. For example a 1/8”...
Read More
The bulbed CherryLock is a high strength blind rivet system particularly suitable for high vibration...
Read More
These cherry rivets are a hollow rivet where the inner stem of the mandrel is drawn into the hollow...
Read More
Rivnuts are an internally threaded tubular aluminium rivet that can be pulled up with a rivnut tool...
Read More
Aluminium body with steel stem, similar to the Cherry BSP and BSC commercial rivets. Head Style Diameter...
Read More
These rivets are ordered by the part number MS20615 followed by a number to denote diameter in 1/32”,...
Read More
View All Products In This Section >
For use with 100° countersunk, flat head screws. Suits Screw OD Plated Stainless Part No Price...
Read More
All screws have Phillips recessed heads and we keep two styles in stock, truss head (mushroom head)...
Read More
Image shows Anchor, Flat and U types (left to right). Type Suits Self-Tapping Screw Part Number Price...
Read More
Thread Edge to Centre of Nut Part Number Price #8-32 UNF 3/8” 477-640 #10-32 UNF 5/8” SL215-3-1SP3...
Read More
Exterior trim screw and washer kits available for a wide range of aircraft. We keep the following in...
Read More
Ideal for upholstery, stainless steel, sold each. Size Length Part Number Price #4 1/4” O4X4 3/8”...
Read More
View All Products In This Section >
These flat washers are used under hex nuts to provide a smooth bearing surface, as shims to obtain the...
Read More
Suits Size ID (“) OD (“) Thickness Part Number Price #10-32 .203 .875 0.063” AN970-3...
Read More
Often used to protect paintwork from damage by screw heads. Fits Screw O.D. Part Number Price #4-40...
Read More
American MS35333 (old AN936A type) 1050 spring steel cadmium plated and stainless. Suits Size Steel...
Read More
Besides being used on Dzus Fasteners, these plastic washers are also ideal for placing under screw heads...
Read More
Countersunk Type Suits Size Part Number Price #4-40 NAS391B4P #6-32 NAS391B6P #8-32 NAS391B8P #10-32...
Read More
Size Part Number Price #4-40 MS35335-29 #6-32 MS35335-30 #8-32 MS35335-31 #10-32 MS35335-32 1/4”...
Read More
View All Products In This Section >