Top of the line Sioux Close Quarter Angle Drills with built-in speed control. Accepts all 1/4”...

Read More

This new air drill packs a lot of power into a very compact form. It delivers enough speed and torque...

Read More

With a head height of only 15/16", it is one of the smallest air angle drills on the market. It's...

Read More

This drill has everything a proper drill should have: speed, durability, and flexibility. And the nice...

Read More

This is the drill you need to get into those tight spaces. It has a head height of just over an inch,...

Read More

It’s one of the few reversing air drills we’ve come across that has all of the right features...

Read More

With a speed of 2600 RPM and .67 hp of power, our new heavy-duty drill can take on any job. Highest...

Read More

Flat Head 90deg. Air, 2000RPM, 1/4x28 Thread. 1/4” capacity. Special head design allows you to...

Read More

The inline configuration of a straight drill lets you reach into tight areas and drill without having...

Read More

Cherry Textron hand riveter is ideally suited for installing Cherry-Q, Pop Rivets, or Avex Rivets in...

Read More

Emhart professional hand pop riveter for 3/32, 1/8, 5/32, 3/16 aluminium rivets, will also operate 1/8...

Read More

1/4” aluminium rivet capacity. The new Huck riveter is a lightweight (only 4.8 lbs), low-cost...

Read More

Pulls avex, pop, and all smooth stem rivets up to 3/16". Not for cherrymax rivets. A quality pneumatic...

Read More

Swivels a full 360 degrees for versatility. Can be operated at any angle. Pulls up to 3/16" Cherrymax...

Read More

Comes with (4) nosepieces that will pull 1/8” to 3/16” Cherrymax rivets. Will also pull...

Read More

Deluxe hand riveter kit includes the Marson HP-2, the largest selling hand rivet tool in the industry....

Read More

3/16” rivet capacity. Pulls monobolts, cherrymax or stainless steel pop rivets. Comes with 1/8”,...

Read More

Milbar’s new safety wire twister pliers (formally the TigerWave) offer the best of all worlds!...

Read More

This tool provides a fast and simple way to drill safety wire holes in the HEAD as well as the BODY...

Read More

Genuine Nicopress tool, manufactured by the National Telephone Supply Co (US). Ideal for swaging of...

Read More

This handy Safety Wire Twister has been a workhorse tool since the early days of aviation. Also called...

Read More

Designed to let you safely drill wire holes in bolts on centre without damage to the bolt or drill....

Read More

The Milbar right-hand safety wire twister has a diagonal nose for easier use in tight areas, and features...

Read More

This is the most versatile safety wiring kit available, and it belongs in every professional's tool...

Read More

The new EZ-TWIST safety wire twisting bit is another ATS exclusive product. It quickly snaps into any...

Read More

An absolute must when rigging aircraft cables, saves time and simplifies the rigging of flight controls....

Read More

Fits any air or electric drill. Accepts rivet shaver bit or pilot cutter up to 1/2” diameter....

Read More

1/2" diameter. 1/4”x28 Thread. 3 flute, 100 degrees. Integral (fixed) pilot for cutting accuracy....

Read More

Three flute design, high speed steel. Diameter Shank Part Number Price .250 3/16” 2000-1/4X3/16...

Read More

This heavy duty microstop uses ball bearings for ultra smooth operation. The ball bearing design also...

Read More

Use this microstop in those tight areas that can’t be reached by a standard cage. It’s only...

Read More

Made from high speed steel. Requires pilot. Cutter Diameter Pilot Size 100° Flat Part No Price...

Read More

Two fluted 100 degree cutter with a 1/2” body diameter and 1/4” x 28 male thread. These...

Read More

High speed steel, 3/8” diameter, 1/4” x 28 male thread, 100 degree x 3 cutting flutes. Replacement...

Read More

4 flute. Made of High Speed Steel. Pilot sold separately. Diameter Length Pilot Shank Part Number Price...

Read More

Removing old paint and corrosion from channels, tracks, and other tight areas is always a challenge....

Read More

Complete set of rotary burrs designed to shape and trim metals and composite materials. Can be used...

Read More

At only 6” long, our new Mini Die Grinders are small enough to fit comfortably in your hand, yet...

Read More

The very high speed and pencil-thin form factor makes this die grinder the perfect tool to do detailed...

Read More

This tool is great for removing paint and corrosion in narrow, confined areas such as seat tracks, or...

Read More

Excellent high speed finishing sander cuts very quickly and features an internal self-generated vacuum...

Read More

Jitterbug sanders provide the ultimate balance of power and controllability. Ideally suited for paint...

Read More

The smooth strength and power of this Dual-Action Sander quickly removes heavy material on large, flat...

Read More

Combines all the features of a well engineered die grinder with the extra reach needed to get into tight...

Read More

010 Series High speed steel, jobbers length, 135° split-point. 012 Series Cobalt, jobbers length,...

Read More

All drill bits have a standard 1/4” x 28 thread. The 2.0” long “L” series bits...

Read More

These amazing drill bits will make sheet metal work a snap! No need to keep changing drill bits. One...

Read More

Drilling through the centre of round stock can be a daunting task without the right tool. Center-It...

Read More

A hand held guide to keep drills and taps 90° to flat or curved surfaces. The guide assembly is...

Read More

Two Lug - Double Wing Screw Size A spacing B spacing C pilot dia D drill size Part Number Price Standard...

Read More

High speed, straight flutes. Expansion Limits +/- 0.006”. Diameter Flute Length Overall Length...

Read More

Ideal for drilling in areas inaccessible to regular 90° angle tools. Made of heavy-duty flexible...

Read More

Designed with a heavy-duty flexible casing and core assembly for longevity. Fits any air or electric...

Read More

This patented new socket design is the innovation of an A&P mechanic who decided to solve the problem...

Read More

Powerful full-ratcheting crimper with safety release and adjustable crimp pressure. Very comfortable...

Read More

Designed to make the installation and removal of electric connectors easier and safe when if is necessary...

Read More

This is the classic style wire stripper that was in every military electronic technician's toolbox....

Read More

Double-ended insertion/removal tool for D-subminiature connectors. Designed for size 20 contacts in...

Read More

Xcelite crimpers are used throughout the aviation industry to install terminals and splices of all types....

Read More

Ratcheting, 4-indent, spring-loaded crimper used to install machined terminal pins in D-Subminiature...

Read More

The Multipurpose Crimper is designed to crimp open barrel, closed barrel, or flag terminals. It also...

Read More

Heavy duty nippers with wire catching clip to trap wire ends before they can fly off and cause damage....

Read More

The Model E2A Tester quiclky locates worn and cracked rings, defective intake and exhaust valves, scored...

Read More

ATS own make comes complete with on-off safety valve to eliminate pressure when disconnecting from the...

Read More

This new Spark Plug Cleaner & Tester features the latest developments in spark plug service equipment....

Read More

The Airwolf Oil Filter Cutter has been hailed as the “best filter cutter we’ve ever used”...

Read More

Features a thin-walled design to get into to the tightest confines. Magnetic interior guarantees that...

Read More

This economical cutter quickly opens any size oil filter canisters for filter inspection. Simply place...

Read More

The New CT-923 Champion Heavy Duty Oil Filter Can Cutter is designed to cut open any spin-on type oil...

Read More

Superior quality wrenches come individually or as a set. Drive end is 1/2” and overall length...

Read More

The new ATS Engine Test Kit has all of the test equipment needed to check engine compression, synchronize...

Read More

Comprises of 1 New Eurmask, 2 active carbon filters (A1/P2) and 10 pre-filters for spray painting. VMI-KIT

Read More

A fine quality tool for testing fabric covered aircraft to see if they meet minimum approved standards...

Read More

Sprays paints, primers, gel coats, lubricating oils, cleaners, zinc chromate, etc. Perfect colour matches...

Read More

New technology from Heritage changes the molecular structure of the steel compound penetrating and hardening...

Read More

Large offset handles allow for easy, straight cutting on flat surfaces. Perfect for general aviation...

Read More

We all know the problems of using aerosols for a prolonged time, your finger aches, your hand can get...

Read More

Before any paint is removed from it’s original container it must be stirred thoroughly so that...

Read More

It has all the features of the Model 8210 with extra blunted tips for fast, safe snagless cutting of...

Read More

Manufactured from high quality top grain steer hide, and are extremely durable. They are correctly stitched...

Read More

These specialized sockets are the ultimate for removing stubborn Hi-Lok® fasteners. Using a left-handed...

Read More

If you install Hi-Loks, you need this kit! The Liberator Roller Clutch Ratchet Kit was designed by an...

Read More

The diamond cut jaws of these Hi-Lok® removal pliers will grip the fastener from the top or bottom...

Read More

These clutch driven installation wrenches are designed for smooth, positive engagement in limited access...

Read More

Designed for installing Frangible Collar (Hi-Lok®) fasteners in limited access areas. Toothless...

Read More

This is a great all-round polishing kit that’s well suited for blending, and buffing out blemishes,...

Read More

A powerful compact polisher that’s perfect for doing detail polishing in tight areas having complex...

Read More

A superior quality polisher kit features a high speed ball-bearing vertical polisher for smooth, quiet...

Read More

An angle polisher is ideally suited for polishing relatively flat areas very quickly. It’s the...

Read More

This powerful polisher makes short work of any buffing job. Heavy duty motor will not bog down under...

Read More

The Cherry G747 is a pneumatic-hydraulic tool designed for the efficient installation of CherryMAX®...

Read More

The H681 series pulling heads are used to install 2000 series Cherrylock rivets. A separate pulling...

Read More

The Cherry G784 Hydro-Shift Riveter is a pneumatic-hydraulic tool designed for the efficient installation...

Read More

These pulling heads will fit Cherry G83 and G84 Riveters and allow you to pull Cherry MaxiBolt, Huck...

Read More

The Cherry G704B is a pneumatic-hydraulic tool designed for the efficient installation of CherryMAX®...

Read More

The GBP744 is a pneumatic-hydraulic tool designed specifically for the efficient installation of 1/4"...

Read More

The GBP704 is a pneumatic-hydraulic tool designed specifically for the efficient installation of Cherrymax,...

Read More

The Cherry G83 pneumatic-hydraulic lockbolt installation tool is a heavy duty production tool designed...

Read More

The GBP700 is a pneumatic-hydraulic tool designed specifically for the efficient installation of 2000...

Read More

The new SmartTool torpedo module packs all of the features of the larger units in a compact 7”...

Read More

All metal gauge designed to accurately determine the sizes and lengths of AN bolts up to 5/8" diameter...

Read More

Handy and economical dial indicator that accurately measure angles from 0°-90° in any quadrant....

Read More

Complete measuring set includes: 6” Dial calliper - .001” graduations; 0-1” Outside...

Read More

The SmartTool is a digital electronic level that delivers precise angular readings. Reads all angles...

Read More

Ideal for laying out equally spaced holes or finding the centre between two points. The zero mark is...

Read More

Ball hole gauges are used to determine the diameter of small holes. They are precision ground and heat...

Read More

Combination sets are very useful as squares, height gauges, depth gauges, level, marking gauge, level...

Read More

These spring-joint callipers and dividers are fully hardened and heat treated. Brushed finish. All styles...

Read More

The next generation of the best-selling 2602 Economy Rivet Gun is 6 ounces lighter, better balanced,...

Read More

The “Jiffy” Corner Rivet Gun is a favourite of the industry because it gets into tight places...

Read More

Introducing the new ATS Pro Series X-Guns. The standard tool used in aircraft manufacturing plants such...

Read More

This rebuilt Chicago Pneumatic OY Rivet Gun is designed to reach into tight areas. It's a very compact...

Read More

Cleco rivet guns are the most popular guns in the industry. They are the guns of choice for professionals...

Read More

Sioux rivet guns are among the finest in the industry. They are used extensively in military and civilian...

Read More

These rivet sets are designed to work with the ATS-200B rivet gun. They will also work with any Jiffy...

Read More

Express your individuality with our new Designer Pro 2X Rivet Gun. You get the same rugged durability,...

Read More

Precision, quality built regulators, accurately control airflow at up to 150 psi. 1/4” NPT thread...

Read More

This is our most popular rivet squeezer, and our customers love it because its heavy duty design will...

Read More

A complete assortment of rivet squeezer sets and dimple dies in a convenient holder. See below for complete...

Read More

This Rivet Squeezer Kit is designed to take on any riveting task. It contains the new ATS Heavy Duty...

Read More

Standard .187 shank. Universal (AN470) head. 3/32” Rivet Size Body Length Part No Price 1/8”...

Read More

Compound leverage develops 3,500 lbs. of force and can easily squeeze 3/32", 1/8", 5/32",...

Read More

The new ATS Bench Rivet Squeezer combines our best-selling ATS Heavy Duty Rivet Squeezer with an innovative...

Read More

All parts are interchangeable with Chicago pneumatic squeezers. Accepts all squeezer sets with .187...

Read More

Missing image 2449 Missing image 2450 Missing image 2451 Missing image 2452 Missing image 2453 Missing...

Read More

Upgrade kit converts 5011-1 and 5022-3 Rivet Squeezers to new bench model. Easy to install. Does not...

Read More

This innovation to our rivet removal tool allows it to remove those stubborn Pop, Avdel, Cherry-Q, and...

Read More

Riveters tape will save you a lot of time and frustration when doing those large riveting jobs by securely...

Read More

For universal and flush riveting. Fits all .401 rivet guns. Standard Missing image 2421 The 5 piece...

Read More

Missing image 2407 Missing image 2408 Missing image 2409 Missing image 2410 470 series 0470 series 1470...

Read More

Missing image 2371 Missing image 2372 Missing image 2373 5-1/8” long, 3” wide, 1-5/8”...

Read More

This tool is just what you need for lining up those rivet holes. The clever accordion action of the...

Read More

Superior for back riveting flush rivets without damage to the skin surface. Spring loaded plastic guard...

Read More

This versatile tool is great for forming sheet metal, driving pins, loosening bolts, etc. Works just...

Read More

Designed to dimple AN426 series rivets. Each set comes complete with swivel set and dimple die block...

Read More

The RV Builders Kit has been completely revised to conform to Van’s recommended tool list for...

Read More

The Master Builders Kit is our most comprehensive riveting kit. It contains the tooling needed to build...

Read More

Basic sheet metal riveting kit. Perfect for students or beginners. This kit is ideally suited for the...

Read More

The Master Riveting Kit contains everything needed to build and maintain all metal aircraft. This kit...

Read More

The only riveting kit on the market especially designed for students. Qty Part No. Description 1 2602A...

Read More

This kit contains the majority of the tools needed in every phase of constructing the popular Kit Mustang....

Read More

Includes tool, nosepiece, and mandrels in sizes 6-32, 8-32, 10-32, and 1/4-20. Also contains assorted...

Read More

Unit is simple to use and allows an inexpensive, efficient means for installing rivnuts. Size Part Number...

Read More

Convert your conventional hand pop riveter into an economical rivnut installer tool. Size Part Number...

Read More

Includes tool, nosepiece and mandrels in sizes 6-32, 8-32, 10-24 &10-32. Industrial strength rivnut...

Read More

The Sioux Rivnut Installation Tool is ergonomically designed for maximum comfort, yet rugged enough...

Read More

Fast economical hand tool for installing aluminium or steel rivnuts or thread-serts. Conversion kits...

Read More

Screw Grab® is a remarkable product that has to be seen to be believed! Just a drop or two placed...

Read More

Also called a "Screw Knocker", "Woodpecker", or "Nut Buster", this tool...

Read More

When a screwdriver can’t remove the screw, use X-OUT. It is specially designed to remove damaged...

Read More

Alden Drill-Out extractors are the only power extractors in the world. The patented design drills and...

Read More

Specifically designed to work with our AT540 Screw Bolt Remover. This kit contains an assortment of...

Read More

Five piece extractor set designed to remove broken screws and bolts. Easy to use, just drill a pilot...

Read More

The Schrader Tee-coupler attaches directly to the strut valve to inflate or deflate the strut via the...

Read More

Our new Aircraft Strut Pump delivers up to 1,500 PSI of pressure to raises struts without the need to...

Read More

The Semco air sealant gun is designed for the quiet, pneumatic application of sealants, adhesives, potting...

Read More

Flares 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", and...

Read More

The Semco model 850 gun is a hand-operated, high quality dispensing gun designed to accept Semco disposable...

Read More

Complete kit to remove and replace brake pads. Includes a punch to remove old rivets and an insertion...

Read More

The ATS Deluxe Brake Bleeder Tank has been completely redesigned to resist the solvent effects of most...

Read More

This kit contains all of the hardware you'll need to deliver nitrogen to tires and struts from a nitrogen...

Read More

These mandrels are recommended in the assembly of aircraft hoses as they help avoid damage to the sealing...

Read More

American “Cleco” clamps, these are spring loaded skin pins which are quick and easy to install...

Read More

Finger operated skin pins using the single offset claw principle. The plastic cap, which is colour coded...

Read More

Used for installation of Cleco clamps and spring tension clamps. 131

Read More

These clamps can be applied in a fraction of the time required for ordinary screw clamps and assures...

Read More

The wide blade and radiused tip makes this Dzus Driver the ideal tool for locking and unlocking Dzus®...

Read More

Bends Dzus® (Z-Lock) “S” wire receptacles quick and easy. One stud length fits all...

Read More

This tool quickly and easily dimples sheet metal panels with the exact countersink angle for Dzus®...

Read More

Hex Nut Fasteners provide high clamping force with the ability to be quickly installed and removed with...

Read More

Use it to install Camloc® (C-Lock ) 2600 and 2700 series fasteners. Quickly installs 2600-LW, 2600-SW...

Read More

Reversible cutter for both 2-1/4” and 3-1/8” instrument panel holes. Easy to use even with...

Read More

Cuts holes in metal, wood, plastic, and hardwoods from 1” to 5-1/2” diameter. Complete with...

Read More

Flanges from 1" and up. 18 gauge capacity. Excellent for flanging lightening holes or overlapping...

Read More

Cuts perfect holes from 2” to 12” diameter in 16 ga. metal and wood up to 1” thick....

Read More

Designed to make precise, controlled cuts in aluminium panels up to 1/4” thick. Leaves a high-luster,...

Read More

Stainless steel brush used to clean away corrosion and paint buildup prior to bonding. Pilot Diameter...

Read More

Punch sizes: 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, & 9/32”....

Read More

Blades are drop forged and precision ground to produce a clean, burr-free cut. Type Part Number Price...

Read More

New 5 blade style crimps more evenly, has 1-1/4” jaw depth. Full 20 ga. capacity O.A.L. 9”....

Read More

This 20 piece sampler kit includes an assortment of 2” and 3” Scotch-Brite(tm) surface conditioning...

Read More

A convenient pack of assorted 6”x9” hand pads lets you decide which product is right for...

Read More

Available in various grades to cover all jobs ranging from light deburring to fine polishing. Each pack...

Read More

2” diameter holder for use with 3M Roloc™ discs. The pads are made of rubber and has a female...

Read More

This self-contained sand blaster gets down to the bare metal. Ideal for sand-blasting rivets to remove...

Read More

SE discs are the choice of professionals when it comes to removing heavy corrosion or surface irregularities....

Read More

A complete sanding and finishing kit that contains a high speed angle sander plus an assortment of 3”...

Read More

Made of five discs of tough cutting polishing web ganged together on a shaft. Use for satin finishing...

Read More

Alternate flaps of coated abrasive and finishing web makes these wheels perfect for blending and finishing...

Read More

The all-digital design of this tachometer makes it accurate to within 10 rpm at all scales. It’s...

Read More

The Hawkeye Flexible Borescope fits into places with restricted access, can be flexed into tight places,...

Read More

The new all digital TruTach II works on production aircraft as well as ultra-light and homebuilt applications...

Read More

This precision instrument is engineered to be accurate to within 1 degree of level or plumb. It provides...

Read More

Since its introduction in the mid 80's, the Autoscope has been the choice borescope inspection tool...

Read More

The pickup wand features a bright white LED light at the end of the chrome plated shaft that telescopes...

Read More

The perfect solution when you need a flashlight, but you need both hands free. The Brighteyes Pro places...

Read More

In only one second, Flashpoint measures temperature of any object -- hot or cold -- without ever touching...

Read More

The Steelman Inspector aids inspection and more importantly saves time! Inspector is a one-hand tool...

Read More