01837 658081
sales@lasaero.com
sales@lasaero.com
Camloc fasteners should be ordered based on the combined thickness of the panels you wish to fasten as per the following table.
| Combined Panel Thickness In Inches | Dash Number |
| 0.030 - 0.059 | -1 |
| 0.060 - 0.089 | -2 |
| 0.090 - 0.119 | -3 |
| 0.120 - 0.149 | -4 |
| 0.150 - 0.179 | -5 |
| 0.180 - 0.209 | -6 |
| 0.210 - 0.239 | -7 |
| 0.240 - 0.269 | -8 |
| 0.270 - 0.299 | -9 |
| 0.300 - 0.329 | -10 |
| 0.330 - 0.359 | -11 |
| 0.360 - 0.389 | -12 |
| 0.390 - 0.419 | -13 |
| 0.420 - 0.449 | -14 |
If the total thickness is near the upper limit of the range then the next longer stud should be used.
Retaining washers are required for studs of -5 length or greater. Use split washer 2600-SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.
Hello and welcome to our website. Contained within these pages is most of the information found in our printed catalogue, all available to order online! In addition you can search our entire inventory of over 125,000 part numbers.
Stock and pricing of all parts listed on this site is live, all prices exclude VAT and shipping. All orders are subject to our standard terms and conditions.
All our stock is available for next day delivery. In addition we have distributorships for Aircraft Tool Supply, LP Aero Plastics, Falcon Gauge, Ceconite / Randolph and Shield Technology to name but a few!
We are also the UK and European distributor for Aircraft Spruce and Speciality, with whom we have been doing business with for over 25 years.
Should you ever need any further information then our experienced sales team are just a phone call or email away and will happily answer any questions you may have.