REP Series (MS21151) External Thread
- Precision series.
- Double row, ball, self-aligning.
- 10° permissible misalignment in either direction.
- These bearings are manufactured with an internal play of .0004" (.010mm) max. Inner and outer raceway surface finish = 8 micro inches AA max.
- Equipped with Teflon seals.
- Exposed surfaces except bore, cap, and seals are cadmium plated.
- Outer shank – 90,000 p.s.i. Min. Tensile Strength.
| Part | MS21151 Dash No | Bore d (") | Width B (") | Diameter D (") | Length L (") | Unified Thread | Price | ||
|---|---|---|---|---|---|---|---|---|---|
| RH Thread | |||||||||
| REP3MR3 | 2 | 0.19 | 0.437 | 0.781 | 1.375 | #10-32 | £POA |
|
|
| REP3M6A | 3 | 0.19 | 0.500 | 0.969 | 2.031 | 3/8"-24 | £POA |
|
|
| REP3M6-2N | 4 | 0.19 | 0.437 | 0.781 | 1.375 | 3/8"-24 | £58.93 |
|
|
| REP4M6 | 6 | 0.25 | 0.500 | 0.938 | 1.812 | 3/8"-24 | £84.44 |
|
|
| REP5M6 | 10 | 0.3125 | 0.870 | 1.25 | 2.438 | 3/8"-24 | £97.57 |
|
|
| LH Thread | |||||||||
| REP3ML3 | 1 | 0.19 | 0.437 | 0.781 | 1.375 | #10-32 | £POA |
|
|
| REP4ML6 | 9 | 0.25 | 0.593 | 0.938 | 1.875 | 3/8"-24 | £85.57 |
|
|
